Duct Work Sealing

We Test and Seal Duct Leaks

Aeroseal Air Duct Sealing

Aeroseal patented duct sealing: UL Tested, Certified Safety. Aeroseal can reduce air duct leakage by up to 90%.

Common Duct Problems

ENERGY STAR Recommends Duct Sealing – Aeroseal can seal holes up to 3/8 of an inch wide. This illustrates common duct problems.

  • A Leaky, torn, and disconnected ducts
  • B Poorly sealed registers and grills
  • C Leaks at furnace and filter slot
  • D Kinks in flexible ductwork restricting airflow

Common Duct Problems

Ductwork Sealing – Air Quality Benefits

Sealing ductwork leaks reduces heating and cooling energy use by up to 30 percent and annual utility bill savings of up to $300.

Ductwork sealing reduces the entry of:

  • Dust
  • Excess humidity
  • Automotive exhaust
  • Radon gas
  • Fumes from stored paints, solvents, pesticides, etc.

Ductwork sealing improves the performance of heating and cooling systems, making you more comfortable by:

  • Cooling or heating the house more quickly
  • Delivering more hot or cold air
  • Distributing heating and cooling more uniformly throughout your house

The patented Aeroseal diagnostic air duct system sealing process is the most effective, affordable, and viable method of sealing the central heating and cooling ductwork in your home.

The Aeroseal process won the “Best of What’s New” award from Popular Science magazine, and the “Energy 100” award from the U.S. Department of Energy (DOE). The DOE also rated the Aeroseal duct sealing process as one of the 23 most beneficial technologies available to American consumers that has come out since the agency was created.

Aeroseal’s aerosol duct sealing process won the

“Best of What’s New” award

Popular Science magazine

and the

“Energy 100” award

U.S. Department of Energy (DOE)

In fact, the DOE also rated the Aeroseal duct sealing process as one of the 23 most beneficial technologies available to American consumers that has come out since the agency was created.

USA Today (Feb 2004) – “If you have a forced-air heating system, have the air ducts cleaned and sealed internally … To have your ducts sealed, go to aeroseal.com.”

Mr. Fix-It’ with tips that’ll help you breathe easier at home

NBC Today Show – Interview by Al Roker (Jan 2004) – “When [Aeroseal is] completed your home will be more evenly tempered and your energy bills will be less. But it also improves your indoor air quality. By sealing the leaks, dust and dirt that can be sucked through the return line is also reduced.”
The Aeroseal air duct sealing system used a simple two-step process: diagnose and seal.

The Aeroseal air duct sealing system used a simple two-step process: diagnose and seal.

To start the Aeroseal duct sealing process, all room ceiling or floor registers are replaced with foam plugs.

A small access hole is cut into the supply or return air plenum and a temporary collar is attached. The air conditioning indoor coil, fan, and furnace are temporarily blocked with a foam plug to avoid the entrance of any sealing particles into this equipment.

Once the system is properly sealed the patented injection machine is connected to the air duct system using a flexible plastic tube.

The exclusive Aeroseal duct sealing system injects adhesive particles into the air duct system. The particles travel through the air duct system seeking holes and cracks that are located throughout the ductwork. The adhesive duct sealing particles attach directly onto the edges of any hole and crack effectively sealing it without coating the inside of the ductwork.

When the diagnosis is complete you will receive a list of recommendations for saving money, improving your home’s indoor air quality, and improving the overall indoor comfort of your home. (Note: Some homeowners, especially those in more extreme or colder climates, elect not to do a diagnostic since their typical duct leakage is 40 to 60%.)

Sealing the air duct system in your entire home requires only 4-8 hours. You’ll immediately receive energy savings and a noticeable improvement in home comfort.

The Aeroseal duct sealing system effectively seals your home’s ductwork from the inside by using a UL tested and approved sealing material. It’s clean, safe, and guaranteed for 10 years.

The measured result of a typical Aeroseal air duct sealing process is shown to the
left.

Aeroseal can reduce duct leakage by up to 90%, reduce your energy use by up to 30%, and save you up to $300 a year in energy costs. Aeroseal has also been shown to dramatically improve comfort and homeowner satisfaction with their heating and cooling systems. Call us today 770-399-7838 to see if Aeroseal is right for you!